Which is a recommended step when troubleshooting cabinet door rubbing after installation?

• A. Replace the cabinet frame.
• B. Check hinge alignment and adjust screws to tilt the door away from the frame.
• C. Paint the door to hide rubbing.
• D. Tighten all screws until rubbing stops.

Answer: (B)

When a cabinet door rubs after installation, the fix is to adjust the hinge alignment until the door sits true to the frame. The rubbing happens because the door isn’t perfectly parallel to the cabinet, so a small shift in how the door sits can create a clear gap and stop the friction. To do this, loosen the hinge screws enough to let the door move, then reposition it so the edge clears the frame. On modern European concealed hinges, use the built‑in adjustment screws to tilt the door away from the frame and fine‑tune its height and in/out position. On traditional hinges, you can shift the hinge plate on the cabinet or loosen and tiny bit move the hinge to achieve the same effect, then retighten.

After you set the door, open and close several times and check for even gaps along the edges at both the top and bottom. This approach directly corrects alignment and preserves the door’s appearance and function. Replacing the frame, painting to hide rubbing, or over-tightening screws won’t solve the underlying alignment issue and can create new problems.